Topic site RC FlightController

aerofly-rc-7-logo_300pxTopic site RC FlightController

If you don´t find the answer to your question at this topic site then you can send a new question. Please use the last post at this page to send a new one. Please note: Already answered questions can´t answer again. The free e-mail support also can´t give an assistance by setting up your computer individually. In this case please contact your computer dealer.


 

Functiontest RC FlightController #3036012

Troubleshooting checklist for an IKARUS RC FlightController #3036012: Folgen Sie den Schritten auf dieser Seite, um einen eventuellen Fehler bei Verwendung einen IKARUS RC FlightControllers zu finden.    

weiter / more

Die Einstellungen und Kalibrierung des Steuergeräts werden nicht gespeichert?[

  Answer: Please note that the aeroflyRC  writes various information in different files in the user’s directory. This includes all graphics settings, the last selected model and also the controller calibration.The target directory is    … /Documents/My documents/aeroflyRC7 There are different reasons for failures: Sstructures or user rights are changed in past Some antivirus programs (such as(…)

weiter / more

Welche Commander und Interfaces kann ich für den aeroflyRC7 nutzen?

weiter / more

Question: How can I check an failure USB interface systematically?

weiter / more

Question: Can I change the control mode at RC FlightController from Mode 2 to Mode 1?

   

weiter / more

Question: My USB Commander 10 is no longer recognized under Windows 8.1 or Windows 10, how do I set it manually?

Important: Depending on your Commander it could be possible that it is no longer support. This is true for commanders of the easyFly3 and easyFly4 Starter Edition (SE). If you have such GameCommanders you will no no longer be able to use them under the current Microsoft operating systems Windows 8.1 and Windows 10. Answer:(…)

weiter / more

Question: My Mac does not recognize the USB Game Commander. Do I have to install a special driver?

  Anwer: To connect a USB controller to your Apple Mac computer, please proceed as follows: First connect the USB controller to your Mac. Start the aerofly flight simulator At aeroflyRC7 please open the “Controller” menu item Click on “Scan for new controllers”. Select the controller in the dialog box Click on “Configure” and follow(…)

weiter / more

Question: Can I use the actual aeroflyRC7 controller for my older aerofly5?

       

weiter / more

Question) How to calibrate a USB joystick or commander under OS-X

  Answer: Please connect your controller to the computer before starting aerofly. Then enable automatic calibration in your controller setup. For automatic calibration to work, you have to move ALL channels to the minimum and maximum positions once after program starts.

weiter / more

Question) How do I install a USB Commander for aeroflyRC?

  Answer:  As a controller for the aeroflyRC you can use all USB devices which will be recognize at the Windows system control  under Printer & equipment as a GameCommander. All you have to do is to connect your USB device with the computer at a free USB port. Windows computers and AppleMacComputers will be recognize the(…)

weiter / more

Question) Can I use USB commanders and interface of other flight simulators?

  Answer: A special feature of aeroflyRC7 is to use the hardware of other flight simulators. These components are tested: • The Interlink Elite Controller from RealFlight• The Simulus controller from Pearl• The flight simulator controller from ESky• The flight simulator controller from Skyartec• The flight simulator controllers from Dynam• Various USB simulator cable recognized(…)

weiter / more

Question) Which USB commanders can I use for aeroflyRC?

  Answer: You can buy the recommended USB RC Flight Controller for aeroflyRC7 directly at our shop. Otherwise you can use all USB devices that will be recognized in the Windows Control Panel under Printers & devices as a  game controller. If you have supported  IKARUS USB controller or  USB interface you can use one of these components:(…)

weiter / more

Question) Which USB Commander can I use for aerofly under OS-X?

  Answer: You can buy the recommended USB RC Flight Controller for aeroflyRC7 directly at our shop. You can use the IKARUS RC Flight Controller also for Apple Mac computer. All you need is a free USB port. If you have an old IKARUS USB controller or an old USB interface, you can use the following components with Mac computers: •(…)

weiter / more

Question: Is it possible to use for the aeroflyRC7 a USB interface cable/controller from a different manufacturer?

  Answer: Whether a cable/controller of a different manufacturer will work depends on the operating system recognizing the cable/controller. If your cable/controller is recognized in the Windows Controle panel under “Printer and Devices” , you may try to use it in aeroflyRC7  as an input device. Click on “Controller” in the control bar in the(…)

weiter / more

Question: I need an over about all former IKARUS USB-Controller

  IKARUS GameCommander at a glance All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander.Below you will find all types of IKARUS GameCommander and 2-player Commander.      

weiter / more

Question: The USB interface cable or Game Commander is not identified by the simulator or control panel.

 

weiter / more

Ask a new question to the Support

If you havn´t found an answer to your question at this site and also not at the forumthen you can ask a new question to the IKARUS support via this contact form:

weiter / more