Question: I need an overview about all former USB Interfaces

All IKARUS interfaces and adapters at a glance

All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander.

There are different versions of the Interface cable. Here you can see the different variants.They differ both in appearance and in function. Depending on your transmitter; additional adapters may be required.

Actual Interfaces:

 

3031010_ueberblick

USB-Interface #3031010 since August 2015

Using the  IKARUS USB Interface #3031010 you can connect your own radio to a Windows or Mac computer as a “joystick”. Since aeroflyRC7 the IKARUS USB interface is not longer needed to launch the software.

For a better distinction the USB interface # 3031010 is delivered in a dark red housing since august 2015.

 

 

3031020_ueberblick

USB-Interface #3031020 since August 2015

Using the  IKARUS USB Interface #3031020 you can connect a receiver (e.g. HoTT) with analog sumsignal to a Windows or Mac computer as a “joystick”.

For a better distinction the USB interface # 3031010 is delivered in a dark red housing since august 2015.

 

 

3031100_ueberblick

RC SimConnector #3031100 since February 2015

Usinf the RC SimConnector #3031100 you can connect any receiver with digital sum signal to your Windows- r Mac-Computern as a “Joystick”

(This interface is usable for Futaba-SBus, MPX-SRXL or Spektrum-Satellit)

 

 

Former Interfaces:

 

USB-Interface for aerofly:

There are three versions of interface cable illustrated below.

Current: USB-Interface stickInterface cable version 1Interface cable version 2
altaltalt

 

These interface cable can be used for aerofly professional Deluxe and for aerofly5


USB-2-player cable:

There are three versions illustrated below:

Current: USB stick

USB Interface cable yellow

 

USB Interface cable red

 

altaltalt

These interface cables can only be used in conjunction with a USB GameCommander or a grey USB Interface cable (both version 1 and version 2) or a black USB stick.

 


USB-Interface cable easyFly:

There are two versions of Interface cable illustrated below.

Current: easyFly4 USB stickeasyFly3 USB Interface cable
altalt

The easyFly interface cable can be used both for the easyFly2 and for the easyFly3.


Adapter:

If you use a version with USB interface cable, you may need a special adapter depending on your transmitter. 

Adapter order No.: #31036

This adapter is required for all RC-Radios with a 3.5 mm mono jack.

You also can use this adapter for all Futaba radios with the 6-pin “cube connector”

 


alt

Adapter Best. Nr.: 31037

This adapter is required for the following transmitters:

Walkera:  WK-2401 (2.4 GHz Lama) with 4-pin Mini DIN

 


 

Adapter Best. Nr.: 31047

This adapter is required for the following transmitters:

Multiplex:   mc-3010; mc-3030

Futaba:  FC-28

robbee:  Mars Rex, Terra Top