FAQs about aeroflyRC7

aerofly-rc-7-logo_300pxFAQs about aeroflyRC7

If you don´t find the answer to your question at this topic site then you can send a new question. Please use the last post at this page to send a new one. Please note: Already answered questions can´t answer again. The free e-mail support also can´t give an assistance by setting up your computer individually. In this case please contact your computer dealer

 

 

Question: RC7 dont run and I dont get any failure message

Answer: There is a typical error setting up your PC blocking aerofly. If your aeroflyRC7 dont not start and if you don’t get any failure message than please check the tm.log file. You can find this file at the user directory under  “… /mydocuments/aeroflyRC7” If the tm.log file ends with these line 00:01-tmmodule: ERROR: (module(…)

weiter / more

How to double check the IKARUS Interface and Single Line Converter?

Connecting IKARUS Single-Line-Converter and Interface #3031010 or #30301020

weiter / more

Error code 60224: Product is already registered

Errorcode 60224: Product is already registered!  The product key of your  aeroflyRC7 or aeroflyFS has been used for the maximum numbers of activations on different PCs. Please contact the support via the contact form below the IKARUS sales Team. Please provide us with need the product key you received after purchasing a download version for(…)

weiter / more

Question: aeroflyFS for Mac crashes when I connect the Playstation 3 controller.

  Answer: There is a bug in aerofly FS that causes the program to crash whenever a Playstation 3 controller is connected to your Mac. Please disconnect the controller before starting aerofly FS. This bug will be fixed in an upcoming update.

weiter / more

Question: aerofly runs extremly slow after changing the graphic settings, what can I do?

   

weiter / more

Question: aerofly crashes right after program start, what can I do?

  Answer: First ensure your PC really meets the minimum system requirements. Most crashes are due to older graphic card drivers. It is strongly recommended that you update your 3D graphic card driver to the latest version before running aerofly FS. Most computers have 3D drivers installed, but aerofly FS requires up to date drivers(…)

weiter / more

Actual Infos about Windows 10

Suchtags: Windows10 Win10 Win-10 Windwos 10  

weiter / more

Question:) Is the upgrade from aerofly5 to aeroflyRC7 bound to the operating system?

  Answer: If you want you can change the OperatingSystem also, when upgrading your aerofly5 to aeroflyRC7  you only need an aerofly5 product key to purchase the discounted upgrade. If you have an aerofly5 for Windows than you can buy an upgrade to aeroflyRC7 for Windows or an upgrade to aeroflyRC7 for OS-X. If you have(…)

weiter / more

Question:) Can I fly my former aerofly after installing an aeroflyRC7?

  Answer: Yes.  Former aerofly flight simulators will not overwritten during an aeroflyRC7 installation. You can fly your former simulators as long as they are compatible with your computer system.

weiter / more

Question) How to restore default settings under OS-X?

  Answer: To restore the factory settings under OS X you have to delete all files in a specific aerofly folder.  It is the config folder in aerofly directory.  Proceed as follow: 1) Open the Finder.2) Click with the mouse in the main menu on “Go to”3) Press the “Option” key. As long as you(…)

weiter / more

Question) How can I activate my aeroflyRC7 offline?

  Answer: If you want to install the aeroflyRC on a computer without internet connection please follow these instructions.

weiter / more

Question) How can I connect my own radio wirelessly?

weiter / more

Question) How can I connect my own radio?

weiter / more

Question) How I can increase the performance at my computer?

  Answer:  The aerofly flight simulator performance depends on the program settings.You can check the system performance very simply by turning on the FPS display (in the main menu under “Graphics” / “Show FPS”).You should not have a value lower than 30 FPS (better 60 FPS). If you want to increase the images per second(…)

weiter / more

Question) Do I have to update a grafic driver at a Mac computer?

  Answer: No. Updates like these will be done automatically by Apple. It´s recommended  to keep the system up-to-date.

weiter / more

What kind of graphics card is recommended for aeroflyRC?

       

weiter / more

Question) aerofly doesn´t run in a battery powered supplied notebook?

  Answer: Currently many laptops have two graphics cards. A simple, power-efficient Intel onboard chip and a second high performance graphics card by AMD (ATI) or Nvidia. Please ensure that aerofly uses the high-performance graphics card and not the power saving card.. Please also note the following video tutorials: Configure Switchable graphics card from ATI(…)

weiter / more

Question) Does aerofly runs on a notebook with HD-4000 graphics card?

  Answer: Only the newer aeroflyFS (for Windows) and the aeroflyRC7 (for Windows) can use Intel graphics processors. You need an Intel HD4000 or higher. In all cases  please install  the latest graphics card drivers  directly from the Intel website. In case of notebooks its not always possible to update a video driver. Check this beforehand. AeroFly Professional(…)

weiter / more

Question) After choosing a higher grafics setup aerofly doesn´t start under windows?

  Answer: If you choose a higher graphics quality settings above the performance of your computer then aerofly can´t start any longer Please reset aerofly to the factory settings in this case. Please follow the instructions to restore the factory settings for Windows computers or Apple Mac computers.

weiter / more

Question: What is important on aeroflyRC7 activation?

  Answer: In opposition to the R/C flight simulators aerofly5 , AeroFly Professional Deluxe , EasyFly3- full-version , easyFly4-full-version is the aeroflyRC7 required 24-digits serial-number for activation or upgrade to the Professional- or Ultimate-version, artificially generated from individual components of the computer hardware. And not, as done in the R/C flight simulators mentioned above read from the USB Game-, USB Easy-(…)

weiter / more

Question) How to restore factory settings under various windows operation systems?

  Antwort: In some cases it may be necessary to restore the factory settings. The procedure is different depending on the various simulators and Windows operating systems:  Under Windows XP  and in case of  AFPD, EeasyFly3 und EasyFly4 you must delete the file main.mcf in the folder: “C: \ Programme \ IPACS \ ………\ config”  Under Windows Vista, MS-Windows(…)

weiter / more

Question) What is the “tm.log” file and where I can find it?

   Infos about the tm.log file  The “tm.log” file is an important tool for the technical support team. The file logs the startup process and helps at troubleshooting. This file only exists after the first program start. Immediately after installation you don´t find a tm.log file. The file is a simple text file. If you are(…)

weiter / more

Question: Is it possible to use for the aeroflyRC7 a USB interface cable/controller from a different manufacturer?

  Answer: Whether a cable/controller of a different manufacturer will work depends on the operating system recognizing the cable/controller. If your cable/controller is recognized in the Windows Controle panel under “Printer and Devices” , you may try to use it in aeroflyRC7  as an input device. Click on “Controller” in the control bar in the(…)

weiter / more

Question: What are the minimum hardware requirements for aeroflRC7?

  Answer: You need an up-to-date computer with at least a core2duo processor as well as an up-to-date hardware accelerated 3D graphic card with minimum 512 MByte, better 1 GByte onboard memory, supporting OpenGL 2.0 or higher , either from NVIDIA– or ATI– manufacturer. Additional information can be found here.

weiter / more

Question) How to connect a Graupner HoTT transmitter to the IKARUS USB interface?

weiter / more

Question) Which graphic cards can I use for aerofly or easyfly?

  Answer: You should only use graphic cards from well-known manufacturers, such as NVIDA Geforce-Series, AMD(ATI) HD-Series or manufacturers who uses NVIDA or ATI as OEM It is necessary, that the graphic card supports OpenGL version 2.0 or higher.   It is not possible to run aerofly without OpenGL 2.0  or higher.

weiter / more

Question: While installing the update for the AFPD I get an error message “unable to overwrite”. What should I do?

  Answer:  While using MS-Windows Vista, MS-Windows7 or MS-Windows 8 you may get an error message while installing the  update. Please make sure, that the simulation is closed. Than make a right-click on the updated file (which you should have saved e.g. to the desktop) and choose “run as administrator”. Afterwards the update should install(…)

weiter / more

Question: What´s about the sound when using a plasma or an LCD display

  Answer: Yes. Plasma or LCD displays normally have an HDMI input plug. Actual graphic cards are supplied with a DVI or already with a HDMI interface. In both cases you need a lead (HDMI – > HDMI or DVI – > HDMI), which is available in well stocked elctronic shops: The simulators aerofly and(…)

weiter / more

Question) Why is the aerofly-, easyfly- USB interface cable (stick version) not recognizing my radio?

  Answer: In order to transmit a strong enough signal some transmitters need to use the interface adapter (#3024040) Otherwise the interface will not work. The IKARUS  USB interface  is equipped with an opto coupler at the input side . This can have as a consequence, that a too weak signal is available for the(…)

weiter / more

Question: Why does the views “follow aircraft” and “cockpit mode” have no funktions in aerofly, easfly?

weiter / more

Question: How is a spektrum transmitter to connect with the IKARUS USB interface?

How to connect a spektrum transmitter with the IKARUS USB interface?

weiter / more

Question: My computer has no internet connection. What can I do?

   Answer:f there is no internet connection  or if you don`t want to connect your PC  to the Internet  then you have an options for an offline activation. In this casepPlease follow these instruction.

weiter / more

Question: How to update the graphic card driver running Microsoft Windows?

   

weiter / more

Question: What is “FPS to low”?

Answer:The  warning “FPS too low” is displayed if the refresh rate FPS (frames per second)  is too low.Once the value is below 24, the impression by the human eye is jerky.In this case please lowering the resolution and quality of the graphics settings or  purchase oa newer, more powerful graphics card.

weiter / more

Ask a new question to the Support

If you havn´t found an answer to your question at this site and also not at the forumthen you can ask a new question to the IKARUS support via this contact form:

weiter / more