|
Supported 3D graphic cards
Please note that the 3D graphic card is the most important part to achieve a smooth simulation. Therefore carefully review this text and check if your card matches the requirements.
Please note: All 3D graphic cards NOT listed here and older than these cards a likely not compatible and are not recommended for easyFly.
Please notice these two recommended combinations of CPU and videocard:
- AMD Athlon 64 3000+ with ATI Radeon X800SE (256 MB)
- Pentium 4 ab 3.0 GHz with NVIDIA GeForce 6800 (256 MB)
Recommended 3D grafic cards:
- Nvidia GeForce 3 and GeForce 4
- Nvidia GeForce 4Go/FX Go/Go 6800
- Nvidia GeForce FX (5700, 5900)
- Nvidia GeForce Serie 6 (6600, 6800, etc.)
- Nvidia GeForce Serie 7 (7800)
- ATI Radeon 9xxx (9700, 9800)
- ATI Radeon X-Serie (X550, X600, X700, X800, X850, X13xx, X16xx, X18xx)
- ATI Mobility Radeon 9xxx Serie
- ATI Mobility Radeon X Serie
- Nvidia GeForce FX 5200 (compatible with easyFly3, except some highly sophisticated
sceneries)
These 3D grafic cards are NOT suitable
- ATI oder NVIDIA 3D grafic cards
- All onboard 3D-grafic cards
- All Intel integrated 3D grafic cards
- All AMD integrated 3D grafic cards
- Nvidia GeForce2 MX series
- Nvidia TNT und TNT 64 series
- ATI XPert / ATI All In Wonder / ATI Rage (only the old 7xxx series)
- 3DFX Voodoo1, Voodoo2, Voodoo3, Banshee
Compatible radios
The following radio can be used with no additional adapters:
- Graupner / JR: FM314, mc-10, mc-12, mc-14, mc-15, mc-16, mc-16/20,
mc-18, mc-20, mc-22, mc-24, FM4014, JR9x, X-347, X-387, X-388, X-756 und X-3810
- Lexors Nova 4, Nova 4+1 sowie Nova 6
The following radios require the separate Y-Adapter #31036 with 3.5 mm mono phone jack and square micro adapter:
- Graupner/JR mx-12,mx-16
- mx-22, 3PJ,T3PJ
The following radios require the seperate Adapter #31047:
- Hitec-Focus 4, Eclipse 7, Flash 5, und weitere Sanwa RD8000, RD6000, VG400, VG600, Radiant, Vanguard,
PPM-Multiplex (All Multiplex radio with trainer output) Futaba FC14, FC16, FC18, FC28, robbe CM-Rex,Terra Top, FMSS and PCMS
|
 |