Select your control option for your aeroflyRC9 and aerofly RC8

All options from that page are compatible with Windows 8/10/11 and actual macOS.

Option #1:

Flying with the RC FlightController (USB)

Using the original IKARUS RC FlightController #3036012 you don´t need any expensive radio as controller! Plug in this USB-Controller into a free USB Port and the commander will be recognize automatic. You can use this controller for Windows PCs and also Apple Mac Computers.

Option #2: Flying via the RC radio trainer plug

Connect your own radio via cable and the IKARUS USB-Interfaceto your computer.

Depending on the radio system we recommend one of the following solutions

Spektrum
You need the USB interface set #3031030, which contains the USB interface, all cables and the needed adapter for the 3.5 mm trainer connector. More about Spektrum…

See this set in the shop: #3031030

Futaba
For all radios with the 6-pin square trainer socket we recommend the USB interface set #3031035. It contains the USB interface, all cables and the needed dapter for Futaba. More about Futaba…

See this set in the shop: #3031035

FrSky
For the 3.5 mm trainer plug you need the USB interface set #3031030, which contains the USB interface, all cables and the needed adapter for the FrSky.

See this set in the shop: #3031030

Option #3: Flying with a sum signal receiver

GraupnerSJ/HoTT
Connect a HoTT receiver with the sum signal output (Sum-0) to the IKARUS USB interface. Up to 12 channels are detected. More about HoTT…

See this set in the shop: #3031020 (without receiver)

Spektrum
You can also connect a Spektrum PPM receiver to the IKARUS USB interface. Specially the Spektrum drone receivers have a separate PPM output, e.g. the Spektrum AR7700-X.

See this set in the shop: #3031020 (without receiver)

Powerbox-Core
If you want to use a powerbox core radio, we recommend the 5-channel receiver PBR-5S together with the IKARUS-USB interface. This core receiver outputs 12 channels via the PPM signal. More about Core…

See this set in the shop: #3031020 (without receiver)

Jeti
You can also connect all Jeti REX receivers or Rsat2 with PPM sum signal  to the IKARUS USB interface. More about Jeti…

See this set in the shop: #3031020 (without receiver)

Option #4: Flying with a S.Bus receiver

Receivers with the following S.Bus systems can be connected to the IKARUS RC SimConnector #3031100: Futaba-S.Bus, MPX-SRXL, FrSky-S.Bus, Spektrum Satellite. Graupner/HoTT with Sum-1, Powerbox-Core with S.Bus. More about Mehr über den SimConnector…

See this set in the shop: RC SimConnector #3031100 (without receiver)

Option #5: Flying with different 8 channel receivers

You can also connect one of your own RC receivers to the IKARUS RC SimConnector #3031100 in the single channel mode. Up to 8 channels can be used via 8 patch cables More about the RC SimConnector…

Multiplex
Diese Lösung ist für alle MPX-Sender empfohlen, vor allem für die älteren MPX-Anlagen. Sie benötigen nur einen Empfänger, den Sie mit Ihrem MPX-Sender binden können.

See this set in the shop: RC SimConnector #3031100 (without receiver)