RC Support aeroflyRC7

Topic site general questions about aeroflyRC7

If you don´t find the answer to your question at this topic site then you can send a new question. Please use the last post at this page to send a new one. Please note: Already answered questions can´t answered again. If you need a personal assistance in setting up the program at your computer so please call our Hotline.

FAQs and their solutions:

How can I fly on water in aeroflyRC

To fly with sea planes on water you need on of the RC7 editions PROFESSIONAL or ULTIMATE To start and land in the aeroflyRC with models of water, please proceed as follows Click on “Scenery” and then “Load scenery” in the aeroflyRC menu and than select “4D” on the left. Now load one of the(…)

weiter / more

Ich muss bei jedem Start die Aktivierung wiederholen

Wenn Sie bei jedem Start des aeroflyRC aufgefordert werden, die Aktivierung zu wiederholen, dann kann der aeroflyRC das bei der Erstinstallation angelegte Benutzerverzeichnis nicht finden. Die häufigsten Ursachen sind Durch ein Windows Update/Upgrade wurden Benutzernamen oder Rechte verändert. Die einfachste Lösung ist in diesem Fall, den aeroflyRC gemäß der nachfolgend verlinkten Anleitung komplett zu löschen(…)

weiter / more

Die Einstellungen und Kalibrierung des Steuergeräts werden nicht gespeichert?[

  Answer: Please note that the aeroflyRC  writes various information in different files in the user’s directory. This includes all graphics settings, the last selected model and also the controller calibration.The target directory is    … /Documents/My documents/aeroflyRC7 There are different reasons for failures: Sstructures or user rights are changed in past Some antivirus programs (such as(…)

weiter / more

Frage: Welche Zusatzfeatures hat ein Multicopter im aeroflyRC?

  Welche Zusatzfeatures hat ein Multicopter im aeroflyRC?   Sie können eine Drone oder Multicopter im aeroflyRC mit verschiedenen Zusatzfunktionen steuern. Hier die wichtigsten Features: Stabi-Mode: Bereits voreingestellt, können Sie die Drone in diesem Mode nur bis zu einer bestimmten Lage übersteuern.   Acro-Mode: Wenn Sie Taste “9” drücken, wechseln Sie in den Acro-Mode. Die Lagebegrenzung(…)

weiter / more

Handstart in RC7-Szenerie ergänzen

  Handstart in einer RC7-Szenerie ergänzen   Auf dieser Seite wird erklärt, wie Sie selber die Handstarter-Position (Launcher) für Segler in einer Landschaft ergänzen können. Sei es in eigenen Handy-Foto-Szenerie oder auch in einer bestehenden des RC7. Dazu ist zu beachten: Diese Modifikation  ist nur für einen RC7 unter Windows möglich Diese Modifikation kann von(…)

weiter / more

Welche Commander und Interfaces kann ich für den aeroflyRC7 nutzen?

weiter / more

How to double check the IKARUS Interface and Single Line Converter?

Connecting IKARUS Single-Line-Converter and Interface #3031010 or #30301020

weiter / more

Question: Can I move the flaps into three positions?

weiter / more

Question: How to install an aerofly?

 

weiter / more

Question: How can I check an failure USB interface systematically?

weiter / more

Error code 60224: Product is already registered

Errorcode 60224: Product is already registered!  The product key of your  aeroflyRC7 or aeroflyFS has been used for the maximum numbers of activations on different PCs. Please contact the support via the contact form below the IKARUS sales Team. Please provide us with need the product key you received after purchasing a download version for(…)

weiter / more

Error message: Error code 60103

Answer: This error message appears if the aerofly can´t reach the license server. You only have to wait and please try it again a few hours later.Your purchase and your activation will not be affected. If the license server is back you`ll be able to proceed.

weiter / more

Question: Where can I find the screenshots creating with “F11”?

 

weiter / more

Question: aerofly runs extremly slow after changing the graphic settings, what can I do?

   

weiter / more

Question: aerofly crashes right after program start, what can I do?

  Answer: First ensure your PC really meets the minimum system requirements. Most crashes are due to older graphic card drivers. It is strongly recommended that you update your 3D graphic card driver to the latest version before running aerofly FS. Most computers have 3D drivers installed, but aerofly FS requires up to date drivers(…)

weiter / more

Actual Infos about Windows 10

Suchtags: Windows10 Win10 Win-10 Windwos 10  

weiter / more

Question: How to connect a second player commander at aeroflyRC7?

 

weiter / more

Question:) Is the upgrade from aerofly5 to aeroflyRC7 bound to the operating system?

  Answer: If you want you can change the OperatingSystem also, when upgrading your aerofly5 to aeroflyRC7  you only need an aerofly5 product key to purchase the discounted upgrade. If you have an aerofly5 for Windows than you can buy an upgrade to aeroflyRC7 for Windows or an upgrade to aeroflyRC7 for OS-X. If you have(…)

weiter / more

Question:) Can I fly my former aerofly after installing an aeroflyRC7?

  Answer: Yes.  Former aerofly flight simulators will not overwritten during an aeroflyRC7 installation. You can fly your former simulators as long as they are compatible with your computer system.

weiter / more

Question: Is the IKARUS USB interface compatibe with Windows and OS-X?

weiter / more

My virus scanner detects the IKARUS download installer as suspicious

  When a download or update is blocked by a virus scanner

weiter / more

Question) How to restore default settings under OS-X?

  Answer: To restore the factory settings under OS X you have to delete all files in a specific aerofly folder.  It is the config folder in aerofly directory.  Proceed as follow: 1) Open the Finder.2) Click with the mouse in the main menu on “Go to”3) Press the “Option” key. As long as you(…)

weiter / more

Error message: Main executable does not work any longer

  Answer: The error message “Main executable does not work” may have different reasons.  If you see this error message immediately after the first installation and you never could start the program, then a problem with the graphics card or graphics card driver is indicated. Please check the video card requirements and take care that you(…)

weiter / more

Question) How can I activate my aeroflyRC7 offline?

  Answer: If you want to install the aeroflyRC on a computer without internet connection please follow these instructions.

weiter / more

Question) How can I connect my own radio wirelessly?

weiter / more

Question) How can I connect my own radio?

weiter / more

Error message: Error code 90000

  Answer: The error code 90000 could have several reasons: Error code 90000 displays if you try to activate an upgrade from aerofly5 to aeroflyRC7 with the product key of your former aerofly5. Please use the newer RC7 product key for activation. You get this key via mail immediately after purchasing the upgrade. Please note that you see(…)

weiter / more

Question) How I can increase the performance at my computer?

  Answer:  The aerofly flight simulator performance depends on the program settings.You can check the system performance very simply by turning on the FPS display (in the main menu under “Graphics” / “Show FPS”).You should not have a value lower than 30 FPS (better 60 FPS). If you want to increase the images per second(…)

weiter / more

Question: What is important on aeroflyRC7 activation?

  Answer: In opposition to the R/C flight simulators aerofly5 , AeroFly Professional Deluxe , EasyFly3- full-version , easyFly4-full-version is the aeroflyRC7 required 24-digits serial-number for activation or upgrade to the Professional- or Ultimate-version, artificially generated from individual components of the computer hardware. And not, as done in the R/C flight simulators mentioned above read from the USB Game-, USB Easy-(…)

weiter / more

Question) How to restore factory settings under various windows operation systems?

  Antwort: In some cases it may be necessary to restore the factory settings. The procedure is different depending on the various simulators and Windows operating systems:  Under Windows XP  and in case of  AFPD, EeasyFly3 und EasyFly4 you must delete the file main.mcf in the folder: “C: \ Programme \ IPACS \ ………\ config”  Under Windows Vista, MS-Windows(…)

weiter / more

Question) What is the “tm.log” file and where I can find it?

   Infos about the tm.log file  The “tm.log” file is an important tool for the technical support team. The file logs the startup process and helps at troubleshooting. This file only exists after the first program start. Immediately after installation you don´t find a tm.log file. The file is a simple text file. If you are(…)

weiter / more

Question: Which models are currently available on aeroflyRC7?

  Answer: An overview of the number of models, features and prices you`ll find at homepage  under aeroflyRC7 / Versions There you can find a full listing of all sceneries and models!  

weiter / more

Question: What are the minimum hardware requirements for aeroflRC7?

  Answer: You need an up-to-date computer with at least a core2duo processor as well as an up-to-date hardware accelerated 3D graphic card with minimum 512 MByte, better 1 GByte onboard memory, supporting OpenGL 2.0 or higher , either from NVIDIA– or ATI– manufacturer. Additional information can be found here.

weiter / more

Error message: The source file is corrupted

  Answer: Installing from DVD please check the DVD for fingerprints or in worst case scratches. If you get the same error message after cleaning the DVD, than the DVD could be damaged, but this is extremely rare. Please cancel in any case the installation, restart the computer and try again. Don´t be successfull pease(…)

weiter / more

Question: I need an over about all former IKARUS USB-Controller

  IKARUS GameCommander at a glance All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander.Below you will find all types of IKARUS GameCommander and 2-player Commander.      

weiter / more

Question: I need an overview about all former USB Interfaces

  Former Interfaces:    

weiter / more

Question) Which graphic cards can I use for aerofly or easyfly?

  Answer: You should only use graphic cards from well-known manufacturers, such as NVIDA Geforce-Series, AMD(ATI) HD-Series or manufacturers who uses NVIDA or ATI as OEM It is necessary, that the graphic card supports OpenGL version 2.0 or higher.   It is not possible to run aerofly without OpenGL 2.0  or higher.

weiter / more

Question: While installing the update I get an error message “unable to overwrite” or “insert DVD”

  Answer:  While using MS-Windows you may get an error message while installing the  update. Please make sure, that the simulation is closed. Than make a right-click on the updated file (which you should have saved e.g. to the desktop) and choose “run as administrator”. Afterwards the update should install without any errors. If the(…)

weiter / more

Question: What´s about the sound when using a plasma or an LCD display

  Answer: Yes. Plasma or LCD displays normally have an HDMI input plug. Actual graphic cards are supplied with a DVI or already with a HDMI interface. In both cases you need a lead (HDMI – > HDMI or DVI – > HDMI), which is available in well stocked elctronic shops: The simulators aerofly and(…)

weiter / more

Question) Why is the aerofly-, easyfly- USB interface cable (stick version) not recognizing my radio?

  Answer: In order to transmit a strong enough signal some transmitters need to use the interface adapter (#3024040) Otherwise the interface will not work. The IKARUS  USB interface  is equipped with an opto coupler at the input side . This can have as a consequence, that a too weak signal is available for the(…)

weiter / more