RC Support USB-Commander

Topic site USB commander

If you don´t find the answer to your question at this topic site then you can send a new question. Please use the last post at this page to send a new one. Please note: Already answered questions can´t answered again. If you need a personal assistance in setting up the program at your computer so please call our Hotline.

FAQs and their solutions:

Can I use my IKARUS RC/FlightController with aeroflyFS2?

  Answer: Yes, that works! To use the IKARUS RC/FlightController #3036012 with the aeroflyFS2, you only have to calibrate the USB controller directly in the program. Please set all trimmers into neutral position and follow the instructions below:        

weiter / more

Functiontest RC FlightController #3036012

Troubleshooting checklist for an IKARUS RC FlightController #3036012: Folgen Sie den Schritten auf dieser Seite, um einen eventuellen Fehler bei Verwendung einen IKARUS RC FlightControllers zu finden.    

weiter / more

Welche Commander und Interfaces kann ich für den aeroflyRC7 nutzen?

weiter / more

Question: How can I check an failure USB interface systematically?

weiter / more

Question: Can I change the control mode at RC FlightController from Mode 2 to Mode 1?

   

weiter / more

Question: My USB Commander 10 is no longer recognized under Windows 8.1 or Windows 10, how do I set it manually?

Important: Depending on your Commander it could be possible that it is no longer support. This is true for commanders of the easyFly3 and easyFly4 Starter Edition (SE). If you have such GameCommanders you will no no longer be able to use them under the current Microsoft operating systems Windows 8.1 and Windows 10. Answer:(…)

weiter / more

Question: My Mac does not recognize the USB Game Commander. Do I have to install a special driver?

  Anwer: To connect a USB controller to your Apple Mac computer, please proceed as follows: First connect the USB controller to your Mac. Start the aerofly flight simulator At aeroflyRC7 please open the “Controller” menu item Click on “Scan for new controllers”. Select the controller in the dialog box Click on “Configure” and follow(…)

weiter / more

Question) How to connect the Jeti radio

  Flying with a Jeti radio on the aeroflyRC You have different options to connect a Jeti transmitter to the aeroflyRC. In all cases you use your Jeti REX receiver or Rsat2 for a wireless transmission of the control signals. Further down on this page you`ll find infos about the basic settings in the Jeti(…)

weiter / more

Question) How do I install a USB Commander for aeroflyRC?

  Answer:  As a controller for the aeroflyRC you can use all USB devices which will be recognize at the Windows system control  under Printer & equipment as a GameCommander. All you have to do is to connect your USB device with the computer at a free USB port. Windows computers and AppleMacComputers will be recognize the(…)

weiter / more

Question) Can I use USB commanders and interface of other flight simulators?

  Answer: A special feature of aeroflyRC7 is to use the hardware of other flight simulators. These components are tested: • The Interlink Elite Controller from RealFlight• The Simulus controller from Pearl• The flight simulator controller from ESky• The flight simulator controller from Skyartec• The flight simulator controllers from Dynam• Various USB simulator cable recognized(…)

weiter / more

Question) Which USB Commander can I use for aerofly under OS-X?

  Answer: You can buy the recommended USB RC Flight Controller for aeroflyRC7 directly at our shop. You can use the IKARUS RC Flight Controller also for Apple Mac computer. All you need is a free USB port. If you have an old IKARUS USB controller or an old USB interface, you can use the following components with Mac computers: •(…)

weiter / more

Question: I need an over about all former IKARUS USB-Controller

  IKARUS GameCommander at a glance All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander. Below you will find all types of IKARUS GameCommander and 2-player Commander.      

weiter / more

Question: The USB interface cable or Game Commander is not identified by the simulator or control panel.

   

weiter / more

Ask a new question to the Technical Support

If you havn´t found an answer to your question at this site and also not at the forum then you can ask a new question to the IKARUS support via this contact form:

weiter / more