All simulators are supplied either with an original IKARUS USB Interface cable or an original IKARUS USB GameCommander. There are different versions of the Interface cable. Here you can see the different variants.They differ both in appearance and in function. Depending on your transmitter; additional adapters may be required.
Actual Interfaces:
USB-Interface #3031010Using the IKARUS USB Interface #3031010 you can connect your own radio to a Windows or Mac computer as a “joystick”. Since aeroflyRC7 the IKARUS USB interface is not longer needed to launch the software. For a better distinction the USB interface # 3031010 is delivered in a dark red housing. |
USB-Interface #3031020Using the IKARUS USB Interface #3031020 you can connect a receiver (e.g. HoTT) with analog sumsignal to a Windows or Mac computer as a “joystick”. For a better distinction the USB interface # 3031010 is delivered in a dark red housing. |
RC SimConnector #3031100Usinf the RC SimConnector #3031100 you can connect any receiver with digital sum signal to your Windows- r Mac-Computern as a “Joystick” (This interface is usable for Futaba-SBus, MPX-SRXL or Spektrum-Satellit) |
These former interfaces are no longer sold:
USB-Interface for aerofly5:
There are three versions of interface cable illustrated below.
| Current: USB-Interface stick | Interface cable version 1 | Interface cable version 2 |
 |
 |
 |
These interface cable can be used for aerofly professional Deluxe and for aerofly5
USB-2-player cable:
There are three versions illustrated below:
| Current: USB stick | USB Interface cable yellow | USB Interface cable red |
 |
 |
 |
These interface cables can only be used in conjunction with a USB GameCommander or a grey USB Interface cable (both version 1 and version 2) or a black USB stick.
USB-Interface cable easyFly:
There are two versions of Interface cable illustrated below.
| Current: easyFly4 USB stick | easyFly3 USB Interface cable |
 |
 |
The easyFly interface cable can be used both for the easyFly2 and for the easyFly3.
Adapter:
If you use a version with USB interface cable, you may need a special adapter depending on your transmitter. Adapter order No.: #31036 
This adapter is required for all RC-Radios with a 3.5 mm mono jack. You also can use this adapter for all Futaba radios with the 6-pin “cube connector”
Adapter Best. Nr.: 31037 This adapter is required for the following transmitters: Walkera: WK-2401 (2.4 GHz Lama) with 4-pin Mini DIN
Adapter Best. Nr.: 31047 
This adapter is required for the following transmitters: Multiplex: mc-3010; mc-3030 Futaba: FC-28, robbe: Mars Rex, Terra Top