To use the IKARUS RC/FlightController #3036012 on the aeroflyFS, you only need to calibrate it directly in the program. To do this, follow these instructions:
On this page you will find the solutions to all error codes such as #2004 or #2005
Before sending in a hardware component for inspection, please note the following information
On this page we answer the most important questions about virtual reality headsets (VR)
In some cases it may be necessary to reset the aerofly to the status after the first installation. For example if you have set the graphic settings to “Ultra” and the program cannot be launched afterwards or you want to delete all old calibrations of an USB Device.
If you want to reinstall an aeroflyRC on the same Windows-PC than please do not use any assistent programs or a RegCleaner for a deinstalltion. Please follow these instructions:
If you want to use the views “follow aricraft” or the “cockpit mode”, please select one of the 4D- sceneries. In photographic sceneries it is not possible change your viewing point for “follow aircraft” mode, nor for the “cockpit mode”.
Flying in second player mode you need two free USB ports and two USB input devices (Commander or interfaces). Please take care about the following aspects:
If you see such programming lines at the edge of the screen, you can switch them off again with the following key combinations
The “tm.log” file is an important tool for the technical support team. See here how to locate the file under Windows or macOS.